BreakThrough Primers!
|
ZIP SAND- Break-Through® Acrylic Sanding Primer is a high solids, fast drying sanding primer for interior wood and wood-related products. Break-Through® 79-1 white sanding primer is waterborne and nonflammable. An excellent choice for cabinets, doors, molding, and trim. Also finds utility as a sandable primer for plastic composites (ie mannequins and displays). |
|
DRY TIME: To touch - 15 minutes(70°F, 50% R.H.) To handle - 30 minutes To sand - 30 minutes Recoat - 1-2 hours COVERAGE: Up to 400 sq. ft. per gallon |
|
1000 Hour Primer applied direct to metal has no equal in providing rust protection for ferrous metals in a water-borne, single component system. Tests show the coating intact with no effect after 1500 hours exposure to hot salt spray. 1000 Hour is a high performance waterborne acrylic primer for steel surfaces. Hard, durable, chemically resistant coating for interior or exterior use. Does not require a topcoat. |
|
DRY TIME: To touch - 30 minutes(70°F, 50% R.H.) To Handle - 1 hour Recoat - 2 hours COVERAGE: Up to 400 sq. ft. per gallon |
|
| MetaLast Red Iron Oxide Primer applied as a first coat on properly prepared metal surfaces. Does not require a topcoat. High performance waterborne, rust inhibitive primer for metal surfaces. Excellent resistance to humidity. Recommended for ferrous and non-ferrous metals. |
|
DRY TIME: To touch - minutes(70°F, 50% R.H.) To Handle - hour Recoat - hours COVERAGE: Up to 400 sq. ft. per gallon |
Back to BreakThrough Products